UTL 1.5mm2 DIN Rail Screw UL94 V-0 Cable Wire Connector
Features:
- Terminal: With general-purpose mounting feet, can be installed on tracks NS32 or NS35.
- Closed bolt leading hole will not only facilitate operation of screwd-rivers, also prevent the bolt from dropping out.
- Electric potential distribution is realized by eitherconnecting central adaptor to the center of terminal or inserting a side adaptor to the cone jack.
- General auxiliaries, such as the end plate, segment spacer, and spacer, are attached for terminal with multiple sections.
- The insulating shell is made if imported engineering plastic-polyamide Nylon 66(PA66). It is of high mechanical intensity, good electic property, and super flexibility.
- Two ends on the top with white marking system to realize uniformed sign.
Rated surge voltage |
6 kV |
Maximum power dissipation for nominal condition |
0.56 W |
Connection data
Number of connections per level |
4 |
Nominal cross section |
1.5 mm² |
Stripping length |
8 mm ... 10 mm |
Internal cylindrical gage |
A1 / B1 |
Connection in acc. with standard |
IEC 60947-7-1 |
Conductor cross section solid |
0.14 mm² ... 1.5 mm² |
Cross section AWG |
26 ... 14 (converted acc. to IEC) |
Conductor cross section flexible |
0.14 mm² ... 1.5 mm² |
Conductor cross section, flexible [AWG] |
26 ... 14 (converted acc. to IEC) |
Flexible conductor cross section flexible (ferrule, w/o plastic sleeve) |
0.14 mm² ... 1.5 mm² |
Flexible conductor cross section (ferrule with plastic sleeve) |
0.14 mm² ... 1 mm² |
Nominal current |
17.5 A |
Maximum load current |
17.5 A (The maximum load current must not be exceeded by the total current of all connected conductors.) |
Nominal voltage |
500 V |
Nominal cross section |
1.5 mm² |
Connection cross sections directly pluggable |
Conductor cross section solid |
0.25 mm² ... 1.5 mm² |
Flexible conductor cross section flexible (ferrule, w/o plastic sleeve) |
0.34 mm² ... 1.5 mm² |
Flexible conductor cross section (ferrule with plastic sleeve) |
0.34 mm² ... 1 mm² |